Heart of Hearts Shaker

I'm slowly working my way through my box of die cuts - all sorts of things that I cut to make a card and then never used.  This card makes use of a couple of die cuts, plus some snippets and some confetti I found in a charity shop to make a shaker card.

The red mirri frame was from my die cut box.  I layered it onto a snippet of red mirri card and attached it to the card blank.  The 'Heart of Hearts' had already been die cut from white hammer card and cut into a stitched square.  I attached a piece of acetate behind the panel and added foam tape around the edges.  I removed the backing from three sides of the tape and attached the panel to a snippet of white hammer card.  After adding the red heart confetti I removed the backing from the tape at the top and secured the shaker.  The panel was then inlaid into the red mirri frame.

To make this card I used:
     6" x 6" white hammer card
     Impression Obsession 'Heart of Hearts' and Lawn Fawn 'Outside In Stitched Square Stackables' dies
     Snippets of red mirri and white hammer card
     Tesco Red Heart Confetti

I am entering the following challenge:
     Happy Little Stampers Anything Goes With Dies - April challenge

Kath x