Floral Tag

I made this tag for the Tag-along (and ATC's) 'Love and Romance' challenge using lots of snippets of card and ribbon.

To make this tag I used:
     Creative Expressions ''Pierced Tags', Creative Expressions 'Finishing Touches - French Marigold' and Sizzix 'Floral Hello' dies
     Snippets of white hammer card, white matt card, red glitter card and red ribbon

I die cut the largest tag from a snippet of white hammer card and used my embossing mat to emboss around the edge of the tag.  I die cut three different size flowers and two large leaves from white matt card.  The flowers were layered and attached to the lower edge of the tag with the leaves tucked underneath the flower.  I die cut a small heart from red glitter card and attached it to the centre of the flower.  To finish I attached a red ribbon bow to the top of the tag.

I am entering the following challenges:
     Beautiful Blossoms - Anything Floral Goes
     Cut It Up Challenge - Anything Goes
     Little Red Wagon - Use the Force (I've used die cutting and embossing)
     Love to Craft - Anything Goes
     Love to Scrap - Anything Goes
     Moving Along with the Times - Use Stencils and/or Dies (I have chosen dies)
     Snippets Playground - Challenge 552
     Tag-along (and ATCs) - Love and Romance

Kath x

November Rudolph Day

It's the eleventh Rudolph Day of the year and another die cut Christmas card (die cutting is my RD theme this year).  To make this card I used a Creative Dies die that had been a cover gift with a magazine back in 2016 and is still a favourite of mine.

To make this card I used:
     5" x 5" white linen card blank
     Creative Dies 'Festive Scene' and Spellbinders Nestabilities 'Standard Circles Large' dies
     Snippets of blue pearlescent card, gold mirri card, Marianne Design 'Snow Paper', thin white card and blue paper

I die cut a circle and the Festive Scene from snippets of blue pearlescent card and attached the scene onto the backing circle.  I attached the blue paper onto thin white card (to make it the same thickness as the rest of the card) and then die cut the sky and inlaid this into the scene.  I die cut the snow from 'Snow Paper'  and the windows from gold mirri card.  These pieces were then inlaid into the Festive Scene.  The panel was then attached to the centre of the card blank.

I am entering the following challenges:
     A Cut Above - Anything Goes with a Die Cut
     Allsorts - Anything Goes
     As You Like It Challenge - Gold, Silver or Glitter (gold is my favourite as I love the warmth it adds to a card.  I'm not a fan of glitter although I do like this 'Snow Paper' to create snowy scenes)
     CAS on Friday - Christmas
     Christmas (or not) BINGO Challenge - I have used Line 'O' (CAS, No Stamping & Free)
     Daisy Chain Challenge - Christmas/Winter
     Moving Along with the Times - Winter Wonderland
     Rudolph Days - November Challenge
     Snippets Playground - Challenge 520

Kath x 

Happy Birthday to You

I made this card for a friend's birthday using the current sketch at the CAS Colours & Sketches challenge.

To make this card I used:
     6" x 6" white matt card blank
     Uniko 'English Country Garden Butterflies' stamp and coordinating die
     Hobby Art 'General Greetings' stamp
     Memory Box 'Wicker Panel' die
     Versafine Imperial Purple ink
     Cosmic Shimmer Clear Detail embossing powder
     Promarkers    
     Wink of Stella
     Snippets of white card

I die cut the Wicker Panel from a snippet of white card and attached it across the front of the card.  I used purple ink to stamp the butterfly onto another snippet of white card and embossed it with clear embossing powder before cutting it with the coordinating die.  The butterfly was then coloured with Promarkers - cream and two shades of green. - with the green areas highlighted with a Wink of Stella.  I put the card into my MISTI and placed the butterfly onto it so I could see where the stamp the sentiment.  After removing the butterfly I stamped the sentiment with purple ink and embossed it with clear embossing powder.  To finish I shaped the butterfly's wings and attached it to the front of the card.

I am entering the following challenges:
     Allsorts - Birthdays
     Alphabet Challenge - K for Keep it Simple
     As You Like It Challenge - Layered or Flat (flat are my preferred type of cards as these fit my CAS style as well as being cheaper to post)
     CAS Colours & Sketches - Sketch 
     Moving Along with the Times - Butterflies and/or Dragonflies
     Simply Clean & Simple - Birthdays
     Stamping Sensations - CAS
     We Love Stamping - Anything Goes
     
Kath x

Have a Wonderful Birthday

I made this card for the Uniko 13th Birthday Celebrations challenge using my new Uniko stencil and stamp set.

To make this card I used:
     6" x 6" white matt card blank
     Uniko 'Sentiments Outlined' stamp
     Uniko 'Ink & Flip Geometric Butterfly Layering Stencil'
     Distress Inks - Seedless Preserves and Spiced Marmalade
     Versafine Imperial Purple ink
     Bruynzeel orange pencil
     Snippets of white matt card

I used Seedless Preserves ink to stencil the butterfly onto a snippet of white card.  I cleaned the stencil and flipped it to stencil it again with Spiced Marmalade.  I then fussy cut the butterfly.  I trimmed another snippet of white card so it was slightly smaller than the card blank and put it into my MISTI.  I placed the butterfly onto the panel so I could see where to position the sentiment.  I removed the butterfly and stamped the sentiment in purple ink before colouring it with an orange pencil.  I attached the panel to the front of the card blank before attaching the butterfly along the body and slightly shaping the wings.

I am entering the following challenges:
     Addicted to Stamps & More - Make Your Mark (I've used Distress Inks, Versafine ink and a coloured pencil)
     Allsorts - Anything Goes
     Love to Craft - Anything Goes
     Moving Along With The Times - Things With Wings
     NBUS - Challenge 71 (I have used my new stencil and stamp set)
     Triple B Challenge - Birds, Butterflies, Blooms (I've opted for a large butterfly)     
     Uniko - 13th Birthday Celebrations
 
Kath x

Love

I made this CAS heart card for a few challenges using a couple more snippets .

I trimmed a piece of white hammer card so it was slightly smaller than the front of the card, die cut and embossed the heart from the centre before rounding the corners and attaching it to the card.  I attached the snippet of heart paper to a piece of paper to make it a little sturdier and the same thickness as the card front.  I die cut and embossed a heart and then inlaid it into the card.  I die cut 'love' twice from white hammer card, layered them and attached the sentiment across the lower part of the heart.

To make this card I used:
     6" x 6" white hammer card blank
     Spellbinders Nestabilities 'Classic Hearts' and Lawn Fawn 'Scripty Love' dies
     Kars tan embossing mat
     Snippets of Wild Rose Studio 'Always and Forever' paper and white hammer card

I am entering the following challenges:
     Addicted to CAS - Hearts
     CAS on Friday - Love
     Happy Little Stampers Anything Goes With Dies - February Challenge
     Happy Little Stampers CAS Challenge - Love is in the Air
     Moving Along With The Times - Valentines/Love

Kath x

True Love

This is another card I've made with a topper and paper from my oddments box

I attached the paper to a piece of thin card to ensure it was the same thickness as the topper.  I trimmed around the edge, die cut a stitched circle from the centre, rounded the corners and attached it to the centre of the card.  I die cut the precoloured image with the stitched die and inlaid it into the aperture.

To make this card I used:
     6" x 6" white matt card
     Lili of the Valley 'True Love' Art Pad
     My Favorite Things 'Inside & Out Stitched Circle STAX Die-namics die
     Woodware Corner Rounder punch
     Wild Rose Studio 'Always and Forever' paper
     Snippet of thin white card

I am entering the following challenges:
     Allsorts - Love is ... (I've included lots of hearts on my card)
     Love to Craft - Anything Goes
     Moving Along With The Times - Valentine/Love

Kath x

Zen Mandala

Last week I was very lucky to win some stencils on the Funky Fossils Facebook Group.  I had three stencils of my choice and Sara also enclosed a lovely birthday stencil too.  I don't often use stencils, probably because I only have a couple of small flimsy ones, but think I'll be using them a lot more now I have these new ones.

I kept this card simple as I wanted to show the lovely Zen Mandala stencil.  I used pink pearlescent ink to stencil the design onto a piece of white card, trimmed the edges, rounded the corners and attached it to the card front.  I die cut the sentiment twice from dark purple card, layered the two die cuts and attached them across the centre of the mandala.

To make this card I used:
     6" x 6" white matt card blank
     Funky Fossil 'Zen Mandala' stencil
     Crafts-Too 'Happy Birthday' die
     Brilliance Pearlescent Orchid ink
     Snippets of dark purple pearlescent card and white matt card

I am entering the following challenges:
     AAA Birthday Card Challenge - A Stencil Background
     Allsorts - Something New (my new stencil)
     Happy Little Stampers Stencil Challenge - Anything Goes
     Moving Along With The Times - New (my new stencil)
     NBUS - January Challenge (my new stencil)

Kath x

New Baby

I'm on a mission to try and use lots of oddments that I've come across whilst clearing my craft area.  This card uses a Lili of the Valley precoloured topper which I'd already die cut and embossed, a sentiment that had been stamped and die cut and a snippet of paper left over from another project.

I trimmed the paper so it was slightly smaller than the front of the card blank before die cutting and embossing the aperture.  I rounded the corners and attached it to the card.  The precoloured topper had already been die cut and embossed so I inlaid it into the frame.  I had previously stamped and die cut several sentiments so I layered two of them and attached them above the baby.

To make this card I used:
     6" x 6" white matt card blank
     Lili of the Valley Art Pad (I'm not sure of the name of the pad - it may have been 'Babies & Toddlers')
     Clearly Besotted 'Modern Calligraphy' stamps and coordinating dies
     Spellbinders Nestabilities 'Labels One' die
     Kars tan embossing mat
     Mememto Gray Flannel ink
     Snippet of blue patterned paper

I am entering the following challenges:
     Allsorts - Anything Goes
     Crafty Calendar Challenge - Make it Cute
     Love to Craft - Anything Goes
     Moving Along With The Times - New (I've chosen New Baby)

Kath x

Rockin' Robin

Today's card is a cute CAS Christmas card for a few challenges.

I stamped the dancing robin and hat onto white card and used the coordinating die to cut them.  These were coloured with Promarkers and a Wink of Stalls added to the robin's red breast and the hat.  I then die cut a frame from two stitched rectangle dies.  I placed the card blank into my MISTI and laid the frame and dancing robin in the centre so I could see where to position the sentiment.  I removed the frame and robin before stamping the sentiment - stamping it a couple of times so I got a good coverage on the embossed card.  I attached the frame with thin foam tape, the robin with double sided tape and the hat with a foam pad.

To make this card I used:
     6" x 4" white embossed card blank
     Clearly Besotted 'Rockin' Robin stamps and coordinating dies
     My Favorite Things 'Inside & Out Stitched Rectangle STAX Die-namics'
     Versafine Black Onyx ink
     Promarkers
     Wink of Stella

I am entering the following challenges:
     CAS Christmas - Christmas Birds
     Crafty Hazelnut's Christmas Challenge - Anything Goes
     Moving Along with the Times - Animals and/or Birds

Kath x