This card was made with another small cross stitch kit I purchased as part of a pre-loved collection. The butterfly is from a design by Jane Greenoff and is stitched onto white aida. The finished cross stitch has been attached to the back of a dark brown pearlescent frame.
The kit had the wording 'Purple Emperor' but I chose to change it to 'Best Wishes' which seemed to fit the design better.
Kath x
It's hard to believe that it's time for the final Rudolph Day of the year - this month's card uses dry embossing and lots of snippets.
I embossed a piece of white pearlescent card with the holly embossing folder. I trimmed around the edge of the frame before layering it onto silver mirri card and attaching it to the card front. I used a sentiment that Di had recently sent me and attached it to a circle of pearlesclent card. This was layered onto a scalloped and embossed circle that had been die cut from silver mirri before being attached to the centre of the card.
To make this card I used:
5" x 5" white pearlescent card blank
Apple Blossom 'Holly' embossing folder
Craftwork Cards sentiment
Snippets of white pearlescent card and silver mirriI
I am entering the following challenges:
Crafty Hazelnut's Christmas Challenge - Anything Goes
Merry Little Christmas Challenge - Anything Christmas Goes
Pixie's Snippets Playground - Challenge 391
Rudolph Day - November Challenge
Kath x
I made this card last week using a cute LOTV precoloured image I came across when tidying a box of toppers. I listed it on Folksy and was pleased to sell it within a couple of days..
I used a stitched square die to cut the precoloured image and then used two dies to cut a square stitched frame from silver mirri. I then used the largest die to cut an aperture in the front of the card blank. I attached a piece of white card on the inside of the card and then inlaid the frame and angel image.
To make this card I used:
6" x 6" white matt card blank
Lili of the Valle 'Angel Praying' precoloured image
Lawn Fawn 'Outside In Stitched Square Stackables' dies
Silver mirri card and white matt card
I am entering the following challenges:
Allsorts - Santa, Elves, Angels (I've obviously chosen the angel option)
Crafty Hazelnut's Christmas Challenge - Anything Goes
Merry Little Christmas Challenge - Anything Christmas Goes
Kath x
This cute snowman had been a magazine cover gift that I had bought in a bundle of items being sold online. In the kit the white part of the snowman wasn't stitched but I thought it looked unfinished so I've used a white thread to fill in the gaps.
After finishing the stitching I fastened the fabric behind a piece of card with a stitched circle aperture and then used foam tape to attach it to the front of the card.
Kath x
This is another card for the Christmas Kickstart Challenge and Let's Squash It challenges using one of my favourite Christmas 'Emboss, Cut & Stamp' sets.
I embossed a piece of white card with the baubles embossing folder and trimmed around the edge so it was slightly smaller than the card blank before attaching it to the card. The embossing folder also die cut the bauble shape. I attached a snippet of the lemon paper to a piece of white card and stamped the bauble before embossing it with clear embossing powder. I put the bauble into the embossing folder to use the die to cut it out. This was then inlaid into the card front. I stamped the bow onto a snippet of purple textured card and embossed it with clear embossing powder. I fussy cut the bow and attached it to the top of the bauble.
To make this card I used:
6" x 4" white matt card blank
Practical Publishing 'Opulent Baubles' embossing folder and stamps
Versafine Imperial Purple ink
Stampendous clear embossing powder
Snippets of lemon paper, white matt card and purple textured card
I am entering the following challenges:
CAS Christmas - Non-traditional colours
Christmas Kickstart Challenge - Use a Christmas embossing folder and a stamp
Let's Squash It - Use a Christmas Themed embossing folder and stamps
Pixie's Snippets Playground - Challenge 390
Kath x
Another quick Christmas card using lots more snippets.
I trimmed a piece of white hammer card so it was slightly smaller than the front of the card blank, rounded the corners and attached it to the card. I die cut the tree from dark blue pearlescent card and attached it to the centre. I used lots of teeny, tiny snippets of silver card to die cut the leaves and inlaid them into the tree.
To make this card I used:
6" x 4" white hammer card blank
Sizzix 'Trees, Leafy' dies
Woodware corner rounder punch
Snippets of white hammer card, blue pearlescent card and cream hammer card
I am entering the following challenges:
CAS Christmas - Non-traditional Colours
Fezzwig's Festive Frolics - Decorate the Tree
Less is More - Blue & Silver
Merry Little Christmas Challenge - Anything Christmas Goes
Kath x
I made this embossed and stamped Christmas card for both the Christmas Kickstart Challenge and the Let's Squash It challenge.
I embossed a piece of white card with the holly folder, trimmed around the edge and attached it to the front of the card. I used brown ink to stamp the Christmas pudding and green ink to stamp the holly onto a snippet of white card These were both embossed with clear embossing powder and cut with the coordinating dies. I attached the pudding to the centre of the card with a foam pad and applied Crystal Stickles to the top. I coloured the berries with a red Promarker and added a Wink of Stella. Once the Stickles had dried I attached the holly to the top of the pudding.
To make this card I used:
5" x 5" white matt card blank
Clearly Besotted 'Christmas Pudding' stamps and coordinating dies
Apple Blossom 'Holly' embossing folder (this had been a cover gift with a magazine)
Versafine Vintage Sepia and Olympia Green ink
Berry Promarker
Crystal Stickles
Wink of Stella
Snippet of white matt card
I am entering the following challenges:
Christmas Kickstart Challenge - Use a Christmas embossing folder and a stamp
Crafty Hazelnut's Christmas Challenge - Use Some Glitter
Let's Squash It - Use a Christmas themed embossing folder and stamps
Kath x
Whilst tidying my craft boxes I came upon this small tri-fold Christmas card - a perfect size to use with small cross stitch designs.
The Christmas tree pattern is from an old Leisure Arts 'Christmas Stitchin'' booklet I've recently bought from ebay - there are lots of small Christmas patterns which are perfect to use with oddments of thread.
After stitching the design I trimmed the aida and inserted it into the card.
Kath x
This is the Christmas card I made for my mum using a lovely Kanban topper- I can post the card now as she doesn't read my blog!
I didn't have a piece of gold mirri large enough for the card front, so I trimmed two smaller pieces and attached them across the front of the card. I trimmed a piece of floral paper which matched the colours and flowers of the topper and layered it onto the mirri. I trimmed a gold patterned strip from the edge of the topper sheet and attached it across the card to hide the join in the mirri. The precoloured topper was then attached to the centre of the card with a foam sheet.
To make this card I used:
7" x 5" ivory matt card blank
Kanban 'Decadent Christmas' topper
Snippets of gold mirri and Making Cards 'Christmas 2019 Craft Paper Collection' paper
I am entering the following challenges:
ABC Christmas Challenge - X for Xtra Special (the card for my mum)
Christmas Crafts All Year Round - Family and Friends
Crafty Hazelnut's Christmas Challenge - Anything Goes
Merry Little Christmas Challenge - Anything Christmas Goes
Kath x
I made this card for the Less is More Colour Challenge. I chose the non-traditional Blue and Silver option so it also fit the current CAS Christmas Challenge.
I used blue ink to stamp the tree and sentiment onto white card and embossed it with clear embossing powder. I trimmed the panel so it was slightly smaller than the front of the card blank, rounded the corners and attached it to the front of the card with a foam sheet. I then used a silver gel pen to highlight the ornaments on the tree.
To make this card I used:
7" x 5" white matt card blank
Woodware 'Delightful Dangles - Christmas Tree'
Versafine Majestic Blue ink
Silver gel pen
Stampendous clear embossing powder
Woodware Corner Rounder punch
Snippet of white matt card
I am entering the following challenges:
CAS Christmas Challenge - Non-traditional Colours
Crafty Hazelnut's Christmas Challenge - Anything Goes 512
Less is More - Colour Challenge - Blue & Silver or Red & Gold
Kath x
This is another of the stained glass cross stitch Christmas decoration I've made using a pattern from a Christmas Cross Stitch magazine.
After completing the cross stitch I ironed some interfacing on the back of the aida before trimming around the edge to fit the plastic frame. These frames only had a piece of cardboard at the back so I attached white felt to make the back of the decoration look neater.
To finish the decoration I added a small piece of red ribbon to the top.
Kath x
I'm taking part in an Advent Swap this year and have used lots of snippets to make the date labels for my gifts which all contain small gifts, most of which are cross stitch related items.
I die cut and embossed small scalloped circles from snippets of gold pearlescent card. I then die cut and embossed small circles from dark purple pearlescent card and attached them to the scalloped circles. I die cut the numerals from the snippets of gold pearlescent card left over from making my snippets circles and attached these to the discs.
And these are the finished parcels ready to be posted.
To make these labels I used:
Spellbinders Nestabilities 'Standard Circles Large' & 'Classic Scalloped Circles Large' and Memory Box 'Classic Numbers' dies
Snippets of gold and dark purple pearlescent card
I am entering the following challenges:
Fezzwig's Festive Frolics - Anything But a Card
Pixie's Snippets Playground - Challenge 390
Kath x